Small Reactor

From Space Engineers Wiki
Revision as of 08:33, 19 December 2015 by Sapphire (talk | contribs) (added information, added image)
Jump to: navigation, search


Small Reactor Icon.png
Large Ship Icon.png
Large Ship / Station
Small Reactor
 
Components
Required

 

 
 
6
 
 
Mass (kg):
0
 
Integrity:
0
 
Build time (seconds):
40
 
Max power output (MW):
15 MW
 
Storage Capacity (L):
1000
 
Dimensions (W x H x D):
1 x 1 x 1
Small Reactor Icon.png
Small Ship Icon.png
Small Ship
Small Reactor
 
Components
Required

 

 
 
1
 
 
Mass (kg):
0
 
Integrity:
0
 
Build time (seconds):
20
 
Max power output (MW):
0.5 MW
 
Storage Capacity (L):
125
 
Dimensions (W x H x D):
1 x 1 x 1

For more information see Electricity#Reactors.

Overview

The Small Reactor provides power to the entire grid it is placed in by consuming Uranium Ingots. It is capable of providing a decent amount of output at the cost of resources, but is far less efficient compared to the Large Reactors. For more information on reactors in general as well as the mechanics, see Electricity#Reactors.

Usage

In order to use the reactor, the player must first acquire the needed fuel. First Uranium Ore must be mined and then processed with the Refinery into Uranium Ingots. These ingots is what powers both the small and large reactors. Power consumption is based on the amount of output the reactor is generating. The higher the output, the more uranium is used. However, the large reactor is 10% more efficient than the small reactor. It is far more economical to build one large reactor, than several smaller ones.

Media

Small Reactor SReact01.jpg

Tips

  • Whenever you place uranium ingots into a container next to a conveyor block that is connected to the reactor ... the reactors automatically will evenly distribute the ingots between each other. If you wish to stop this, you have to turn off the conveyor option in the reactors control panel.
  • If there is no power on the ship, you cannot transfer uranium into the reactor through containers or conveyors, it must be done directly. So always leave a spot open for manual input.

Known Issues

See Also

Programming

Update History

N/A
  • N/A